MYE-1000 Intelligent Paper Cup Embossing Machine

MYC-OCM100 Intelligent Model paper cup machine

What the MYE-1000 Intelligent Paper Cup Embossing Machine Does

The MYE-1000 intelligent model is a dedicated embossing machine for paper cup production. It forms a raised or textured pattern on cup surfaces, adding a decorative and tactile finish to the finished cup. It is intended for paper cup converters and food-packaging producers who want to differentiate their cups through surface design rather than plain printing alone.

This is a standalone embossing unit, not a complete cup-making line. It works alongside cup forming equipment and other converting stages, so buyers should plan it as one step within a wider production flow.

Key Configuration Highlights

• Double-station design: two working stations support continuous operation and help raise the effective running speed of the machine.
• Hydraulic forming system: the hydraulic approach is intended to deliver large and stable forming pressure, which supports a clean finished forming effect.
• Robot arm collection device: finished products are collected automatically; once the set quantity is reached, the conveyor belt transports them away to prevent product accumulation at the discharge point.
• Mould durability and customization: the mould is described as long-life and supports customization, so the embossing pattern can be matched to the buyer's design intent.

Rated machine speed and other confirmed values are listed in the Technical Specifications field on this page. Actual stable output depends on cup size, paper material and pattern depth, and should be confirmed against your own sample.

Selection Variables to Confirm Before Ordering

Embossing results depend heavily on the cup and paper being run. Before a configuration can be matched, buyers should be ready to discuss the following:

Sample Display

The sample image above shows the type of surface effect the machine is intended to produce. Because pattern depth and clarity vary with paper grade and coating, buyers should send their own cup sample and artwork so the embossing result can be assessed against a real reference.

How It Fits Into a Cup Production Line

The MYE-1000 is best planned as a finishing step. Cups are formed first, then passed to embossing, and finally collected and moved on for inspection or packing. The automatic robot arm collection and conveyor discharge reduce manual handling at the end of the embossing stage, which helps keep the working area clear during continuous runs.

If you are still specifying the forming stage, the MYC-OCM100 Intelligent Model paper cup machine is a relevant reference for matching cup sizes and line rhythm. For buyers comparing single-wall and double-wall formats, the single and double wall paper cup solutions overview explains how the finishing stages differ.

Information to Send for Matching

• Cup drawing or a physical sample with top, bottom and height dimensions
• Paper material, GSM and coating type
• Embossing artwork, target depth and coverage area
• Target output per shift and your acceptable quality standard
• Workshop voltage, frequency, air supply and available floor space
• Layout of the surrounding line, including infeed and discharge positions
• Packing requirement for the finished cups

Sharing these details lets the configuration, mould and collection layout be matched to your actual production rather than a generic setup. Where a value is not yet fixed, note it as "to be confirmed" so it can be settled during technical review.

Next Step

To discuss the MYE-1000 for your cup range, send your cup sample, artwork and output target through the inquiry form on this page, or contact the sales team via WhatsApp for a direct technical conversation. You can also review running footage in the machine running video section to see how comparable equipment operates before finalizing your specification.