MYC-OCM100 Simple Model Paper Cup Machine and MYC-D Paper Cup Sleeve Machine Production Line

MYC-OCM100 Basic Model Fully Automatic Paper Cup Machine

The MYC-OCM100 is a fully automatic paper cup forming machine that carries out the complete converting sequence in one unit: paper feeding, cup body sealing, bottom forming and top curling. As a basic model, it is configured for practical, repeatable production of standard paper cups rather than for maximum output or extended customization.

This machine is a reasonable starting point for buyers who need a dependable single-machine cup forming solution and whose cup design stays within a standard, well-defined size range. Because the forming sequence is integrated, the machine's suitability depends heavily on the cup drawing rather than on the machine name alone.

What Determines Whether the OCM100 Fits Your Cup

• Cup dimensions: top diameter, bottom diameter and height of the finished cup, taken from the drawing or a physical sample.
• Paper and coating: single PE or double PE coated board, and the GSM range you intend to run.
• Target output: the stable output you need per shift, which is not the same as a rated speed figure.
• Sealing method: the body and bottom sealing configuration must match your paper and coating.
• Utilities: available voltage and frequency, plus air supply pressure and consumption at the installation site.
• Workshop and packing: floor space, layout around the machine, and how finished cups will be collected or packed.

MYC-D Cup Sleeve Machine

The MYC-D is a cup sleeve machine that operates in line with the paper cup machine. It handles the automatic forming and application of cup sleeves, so the sleeve stage follows cup forming without a separate manual step. This connection is what allows a continuous flow from cup body production to sleeved cup output.

Buyers considering the MYC-D should confirm the sleeve dimensions, the sleeve paper and GSM, and how the sleeve machine is linked to the cup machine in their layout. The sleeve machine is a distinct unit, not an optional module inside the cup machine, so the interface between the two machines should be planned before purchase.

Information to Send for Matching

To confirm whether the OCM100 and MYC-D combination matches your project, send the cup drawing or a sample, the top/bottom/height dimensions, the paper type and coating, the GSM, your target output, the site voltage and frequency, the available air supply, and your workshop layout and packing requirement. With these details, the machine configuration and the line connection can be checked against your actual product instead of a generic size range.

For a closer look at how cup forming and sleeve machines are connected in real projects, see the MYC-OCM12 intelligent model paper cup machine with MYC-DW100 paper cup sleeve machine production line catalog. Buyers who are still deciding on materials can review what raw materials are used to produce paper cups before finalizing paper and coating.