The seal on one side of the paper cup is not firm

Question

One side Of The Paper Cup ls Not Sealed

Solution SETP1

wait for the machine to heat up

SETP 2

Turn on the paper suction switch,press and hold

SETP 3

After the machine sucks a piece of paper,turn off thepaper suction switch,only one piece of paper isneeded for testing

SETP 4

Keep pressing the inching button,stop inching untilthe paper cup passes through the heating furnace

SETP 5

Press the inching button to adjust the mold to themiddle position.lt is convenient for us to removethe paper cup for inspection

SETP 6

Press the push-pull rod above the mold

SETP 7

Or tear the paper cup on the mold little by little,becareful not to damage the structure under the papercup

SETP 8

Take off the paper cup,check the internal structure ofthe paper cup,is the folded bottom formed,ls the gapbetween the cup wall uniform

SETP 9

Turn the paper cup over to check the bottom of thepaper cup,also check whether the back is uniformif the folded bottom is uniform al around,then thereis no problem

SETP 10

STEP 11

First, we need to check the temperature panels ofpreheating 1 and preheating 2,check whether thetemperature of the machine reaches the set 280'°

STEP 12

If the machine temperature is lower than 280'C,youneed to wait for the machine to heat up

STEP 13

Second, check the knurled heating panel,our usual setting range,is 230-260°C

STEP 14

If everything else is fine,and there is still watereakage,you need to raise the setting of 230°to 260°C